With the release of the PCIII (PC3) the Powercommander site no longer has PCII / PC2 / Powercommander II / Powercommander 2 stuff on it. Available here is the PCII / PC2 / Powercommander II / Powercommander 2 software and manual plus the M301 for the Suzuki TLS / TL1000S and M303 for the Suzuki TLR / TL1000R maps from Dynojet. I've also added the file needed to transfer maps from a Palm Pilot to the PCII
Here are links for the PCII program and TL1000S / TL1000R map files. Right click "save-as". Don't just click on the links and try and stream them, it's better to save them to your hard drive and then open them.
If you want to fire up the PCII off the bike and load / play with maps on it you can power it up via a 9V battery and a serial cable.
Here's the pin configuration
- Comms is straight through 2-2, 3-3, 5-5.
- DB9 Female end (connects to the computer) Pins 2, 3, 5
- DB9 Male end (connects to the PCII) Pins 2, 3, 5
- Power on the male end (connects to the PCII)
- +ve from battery to pin 1
- -ve from battery to pin 5 (shares it with the comms ground)
 Click the image for a larger view
|
