Power Commander

With the release of the PCIII (PC3) the Powercommander site no longer has PCII / PC2 / Powercommander II / Powercommander 2 stuff on it. Available here is the PCII / PC2 / Powercommander II / Powercommander 2 software and manual plus the M301 for the Suzuki TLS / TL1000S and M303 for the Suzuki TLR / TL1000R maps from Dynojet. I've also added the file needed to transfer maps from a Palm Pilot to the PCII

Here are links for the PCII program and TL1000S / TL1000R map files. Right click "save-as". Don't just click on the links and try and stream them, it's better to save them to your hard drive and then open them.

Power Commander PCII software
PCII software and manual 9.3mb. Right click "Save Target as..."
PowerCommander PCII TL1000S TLS Maps
TL1000S M301 PCII maps 6kb. Right click "Save Target as..."
  Power Commander TL1000R TLR Maps
TL1000R M303 PCII maps 3kb. Right click "Save Target as..."
Palm Pilot PCII software
Palm software for transferring maps from a Palm Pilot to a PCII "Save Target as..."
Get Beer
Here's my Palm Pilot

If you want to fire up the PCII off the bike and load / play with maps on it you can power it up via a 9V battery and a serial cable.

Here's the pin configuration

  • Comms is straight through 2-2, 3-3, 5-5.
  • DB9 Female end (connects to the computer) Pins 2, 3, 5
  • DB9 Male end (connects to the PCII) Pins 2, 3, 5
  • Power on the male end (connects to the PCII)
  • +ve from battery to pin 1
  • -ve from battery to pin 5 (shares it with the comms ground)
PCII Connected

Click the image for a larger view